Jack Stand Wall Hook 3D Printer Model
The file 'Jack Stand Wall Hook 3D Printer Model' is (STL) file type, size is 49.1KB.
The file 'Jack Stand Wall Hook 3D Printer Model' is (STL) file type, size is 49.1KB.
Hang jack stands from the wall and free up shelf/floor space.
Multiple lengths are available. See the CAD screenshot, circled dimension. The one that worked best for me was 46 mm.
The hole is sized for a #8 standard flat head screw which are widely available in the US. I should note that US flat head screws typically have an 82 degree angle while metric screws typically have a 90 degree angle, so if you use an M4 flat-head screw it will only contact around the very edge of the head. An M4 button-head or socket-head screw with a washer would be a better option if you are outside the US and don't want to modify the model to accept a flat head metric screw. In any case, make sure the screws you buy are long enough to go through the part, the drywall, and at least 3/4" (19 mm) into the stud.
| Jack_stand_hook-40.STL | 22.3KB | |
| Jack_stand_hook-42.STL | 22.3KB | |
| Jack_stand_hook-44.STL | 22.3KB | |
| Jack_stand_hook-46.STL | 22.3KB | |
| Jack_stand_hook-48.STL | 22.3KB | |
| Jack_stand_hook-50.STL | 22.3KB | |
| Jack_stand_hook-52.STL | 22.3KB | |
| Jack_stand_hook-54.STL | 22.3KB | |
| Jack_stand_hook-56.STL | 22.3KB |
