Interlocking Earth Puzzle 3D Printer Model
The file 'Interlocking Earth Puzzle 3D Printer Model' is (stl) file type, size is 25.0MB.
The file 'Interlocking Earth Puzzle 3D Printer Model' is (stl) file type, size is 25.0MB.
This 20-piece earth puzzle will test your geography knowledge!
The puzzle is based on a 20 sided icosahedron. Each edge has a tab that will interlock with any other edge on any other piece.
The files are grouped in to "N," "NE," "S," and "SE." Each group contains five puzzle pieces. Pieces labeled "N" share a vertex that lays roughly at the north pole near the Bering Strait. "NE" pieces all share an edge with an "N" piece. Pieces labeled "S" share a vertex near the south pole. "SE" pieces all share an edge with an "S" piece.
There are separate files for each piece, as well as "Combined" files to print groups out together. Printing the "Combined" files is the best way to go. The "Full Earth Print Ready" has all the pieces together, but this is risky in that an error part way through the print will ruin the whole thing.
Printing this with layer heights of .15 mm or greater results in visible contour lines in the oceans that can be distracting to the overall design. I recommend printing with a layer height of .10 mm or less.
| Full_Earth_Globe.stl | 16.5MB | |
| Full_Earth_Print_Ready.stl | 16.5MB | |
| N1.stl | 847.6KB | |
| N2.stl | 848.3KB | |
| N3.stl | 841.0KB | |
| N4.stl | 845.2KB | |
| N5.stl | 842.3KB | |
| NE1.stl | 843.2KB | |
| NE2.stl | 848.6KB | |
| NE3.stl | 838.5KB | |
| NE4.stl | 849.0KB | |
| NE5.stl | 836.3KB | |
| NE_combined.stl | 4.1MB | |
| N_combined.stl | 4.1MB | |
| S1.stl | 843.1KB | |
| S2.stl | 841.9KB | |
| S3.stl | 842.5KB | |
| S4.stl | 850.9KB | |
| S5.stl | 841.5KB | |
| SE1.stl | 841.5KB | |
| SE2.stl | 838.9KB | |
| SE3.stl | 849.2KB | |
| SE4.stl | 844.0KB | |
| SE5.stl | 837.9KB | |
| SE_combined.stl | 4.1MB | |
| S_combined.stl | 4.1MB |
