Incense Holder 3D Printer Model
The file 'Incense Holder 3D Printer Model' is (f3d,step,stl) file type, size is 1.5MB.
The file 'Incense Holder 3D Printer Model' is (f3d,step,stl) file type, size is 1.5MB.
This was made on a CNC. The first edition had a hole that was too large. You will need the following if you plan to make this.
1/8" ball end mill or 3-4mm endmill
1/16" twist drill or 1.5-1.6mm drill bit
Wood that is at minimum 100mm x 100mm x 25mm or 4" x 4" x 1"
Use whatever print settings you desire, if you print it.
DO NOT use a 1/8 endmill to make the hole. that's too big, and it will cause you a massive headache. The proper sized hole had to be drilled out afterwords, to my dismay.
| incense.f3d | 1.4MB | |
| incense.step | 73.8KB | |
| incense.stl | 344.0KB |
