IKEA Hack – Marius Stool – Plug 3D Printer Model
The file 'IKEA Hack – Marius Stool – Plug 3D Printer Model' is (3mf,gcode,obj,stl) file type, size is 6.8MB.
The file 'IKEA Hack – Marius Stool – Plug 3D Printer Model' is (3mf,gcode,obj,stl) file type, size is 6.8MB.
A little addition to add some color to your IKEA stools. Snaps into the holes of the stool and makes it look a whole lot prettier. Doesn't fall out unless you knock it about or press it out.
I found that I have 2 different models of the stool, and they have different size of holes. So I've added a version for the older (smaller) hole as well.
The newer model is ~29.5mm and the older is ~27.6mm. I named the older one "smaller".
https://www.ikea.com/us/en/catalog/products/10135659/
Includes STL, OBJ, GCODE and 3MF of the plug, and a 3MF and GCODE of a bundle of 8 to print a full set for a stool.
| 8xIKEA_Hack_-_Marius_Stool_-_Plug.3mf | 829.0KB | |
| 8xIKEA_Hack_-_Marius_Stool_-_Plug.gcode | 8.0MB | |
| 8x_IKEAMariusPlugSmaller_3h15m_16g.3mf | 816.9KB | |
| 8x_IKEAMariusPlugSmaller_3h15m_16g.gcode | 9.7MB | |
| IKEAMariusPlugSmall.obj | 340.3KB | |
| IKEA_Hack_-_Marius_Stool_-_Plug.3mf | 153.6KB | |
| IKEA_Hack_-_Marius_Stool_-_Plug.gcode | 1016.3KB | |
| IKEA_Hack_-_Marius_Stool_-_Plug.obj | 936.5KB | |
| IKEA_Hack_-_Marius_Stool_-_Plug.stl | 1.2MB |
