Hoenir – Airsoft Ballistic Knife 3D Printer Model
The file 'Hoenir – Airsoft Ballistic Knife 3D Printer Model' is (stl) file type, size is 100.1KB.
The file 'Hoenir – Airsoft Ballistic Knife 3D Printer Model' is (stl) file type, size is 100.1KB.
Hi All
This project is pretty cool, it's a ballistic knife, wich means the blade shoots out out the handle !
You will need a compression spring, 10mm in diameter 30mm when compressed and something like 70mm or a bit more when uncompressed.
I used the springs in an old Well bipod (there are 2 in each "leg").
Use a bit of epoxy or hot glue to attach the spring to the bottom of the handle.
You will also need a 25mm m3 screw.
You can print the blade (use flexible filament if you want to shoot at people), or print the blade mold (m3 screws to assemble the 2 parts of the mold) and cast flexible resin inside to get a safe flexible blade. I used this method to make about 20 blades with no problem.
Like my stuff ? Follow me !
Love it ? Tip me ;)
License is non commercial. Want to sell my stuff ? Send me a message ;)
| BF_Bouton.stl | 22.4KB | |
| BF_Lame2.stl | 80.2KB | |
| BF_Manche_02.stl | 172.9KB | |
| BF_Piston.stl | 39.8KB | |
| Moule_Lame.stl | 139.9KB |
