H&K Mp5 Tactical Swordfish Striker “PorkChop” 3D Printer Model
The file 'H&K Mp5 Tactical Swordfish Striker “PorkChop” 3D Printer Model' is (stl) file type, size is 204.2KB.
The file 'H&K Mp5 Tactical Swordfish Striker “PorkChop” 3D Printer Model' is (stl) file type, size is 204.2KB.
This is a comission I did for an airsoft MP5 Swordfish body kit. I don't know the make of the replica and the dimensions may not work properly for other brands but I hope it will be of good use. I designed the parts with stiffness in mind and they are optimized to be printed without supports. I also provided photo examples on how to place the parts on the print bed.
I recommend to use 3 perimeters for the walls. I used PLA for the model as it won't see much use, but you could go with PETG if you want a longer lifetime but I don't think it's a must.
You will also need M4x12 and M3x10 hex screws.
The parts have slots in them so you can add nuts, but during the first few assemblies the screws thread themselves pretty well on the part and nuts aren't required.
Happy printing and Happy Holidays!
| Front_Body_FINAL.stl | 320.4KB | |
| Front_Rail.stl | 80.7KB | |
| Front_Stiffener.stl | 187.6KB | |
| Lateral_Plate.stl | 154.2KB | |
| Main_Body_Hook_Left.stl | 42.3KB | |
| Main_Body_Hook_Right.stl | 46.2KB | |
| Middle_Rail_Screwing_Pad.stl | 20.4KB | |
| Rear_Rail.stl | 165.8KB |
![Male Regulator Cap [1/2 NPS -14 Thread] 3D Printer Model](https://res.3axis.co/a0abfa41-b681-4972-865e-dcc10df663f1/images/f0ef2d60-a447-4831-bc64-d5a81daf8e9e_thumb.jpg)
