A request popped up from GAMERGORMAN20 for a 'Mirror of Erised' from the Harry Potter series. Since I love a good challenge I whipped up my version using the stills provided. I have two versions, one with a back and the other without so you can mount a mirror for effect. The size of the object is based off of the images, scale to fit your printer if necessary.
Let me know what you think!
UPDATE!: A request came in to have the mirror segmented into smaller chunks to fit a 200mm x 200mm print bed. I have segmented the open version into chunks no bigger than 200 wide by 200mm deep. The assembled size should match the original of 807.8 x 1347.4 x 83.6mm. I have also uploaded the full sized chunked version in case you need to know where each piece fits. NOTE, I have not printed these pieces but I have run them through my 3D applications that can determine is the file is manifold.
If you have questions or problems with any of the files, feel free to send me a message.
| Bottom_Middle.stl | 1.8KB | |
| Left_1.stl | 84.2KB | |
| Left_2.stl | 495.3KB | |
| Left_3.stl | 284.0KB | |
| Left_4.stl | 29.2KB | |
| Left_5.stl | 42.3KB | |
| Left_6.stl | 36.2KB | |
| Left_7.stl | 38.5KB | |
| Left_Bottom.stl | 24.7KB | |
| Left_Middle_1.stl | 423.2KB | |
| Left_Middle_2.stl | 316.9KB | |
| Left_Middle_Bottom.stl | 3.2KB | |
| Middle_1.stl | 10.8KB | |
| Middle_2.stl | 637.5KB | |
| Middle_3.stl | 72.3KB | |
| Mirror_of_Erised.stl | 4.4MB | |
| Mirror_of_Erised_Open.stl | 4.4MB | |
| Mirror_of_Erised_Segmented.stl | 4.2MB | |
| Right_1.stl | 84.7KB | |
| Right_2.stl | 495.8KB | |
| Right_3.stl | 284.0KB | |
| Right_4.stl | 41.8KB | |
| Right_5.stl | 42.3KB | |
| Right_6.stl | 36.2KB | |
| Right_7.stl | 38.1KB | |
| Right_Bottom.stl | 24.5KB | |
| Right_Middle_1.stl | 391.4KB | |
| Right_Middle_2.stl | 298.8KB | |
| Right_Middle_Bottom.stl | 3.2KB |
