I made a hand grenade prop, I modelled it loosely after the one in Rainbow Six Siege! It has an optionally springloaded retention arm. (For that to work you'll also need a Spring (mine was 7,5mm diameter, 35mm long and it's thickness was 0,7mm), a small locking pin (anything made of metal will work, I used a nail and snipped both ends off, it measures 1,5mm x 20mm) and you'll also need a keyring for the locking pin!
I hope you give this a print and if you did and REALLY like it, consider tipping, but it's not obligatory of course!
You'll need to print one of each .stl file to make one of these! Supports are a must!
If you will be adding a spring, make sure to print the nadeArm.stl on it's side!
| nadeArm.stl | 290.6KB | |
| nadeBulb.stl | 555.5KB | |
| nadeFusepin.stl | 376.2KB | |
| nadeHousing.stl | 319.9KB | |
| nadeInserts.stl | 532.5KB |
