A straight forward GRBL file to help set the power-curve for cutting various materials. I found similar files for Lightburn and xTool, but didn't want the extra overhead for such a simple tool.
This is a single pass, 2 axis test card that will demonstrate both speed and power. You can use the laser engraver menu to increase the number of passes for thicker materials.
Once complete, determine which box looks best for the specific material and update the settings.
Happy cutting!
| Laser_Power-curve_Cut_100.stl | 20.8KB | |
| Laser_Power-curve_Cut_20.stl | 20.8KB | |
| Laser_Power-curve_Cut_30.stl | 20.8KB | |
| Laser_Power-curve_Cut_40.stl | 20.8KB | |
| Laser_Power-curve_Cut_50.stl | 20.8KB | |
| Laser_Power-curve_Cut_60.stl | 20.8KB | |
| Laser_Power-curve_Cut_70.stl | 20.8KB | |
| Laser_Power-curve_Cut_80.stl | 20.8KB | |
| Laser_Power-curve_Cut_90.stl | 20.8KB | |
| Laser_Power-curve_Mark_H.stl | 586.9KB | |
| Laser_Power-curve_Mark_V.stl | 362.1KB | |
| Laser_Power-Curve_Wood_Test.nc | 102.5KB |
