GoPro Mount Kit 3D Printer Model
The file 'GoPro Mount Kit 3D Printer Model' is (stl) file type, size is 2.6MB.
The file 'GoPro Mount Kit 3D Printer Model' is (stl) file type, size is 2.6MB.
GoPro arm and mount copies of every stock mount GoPro sells in their standard kit plus a few extras. The inline models print very easy with no brim or raft necessary. The twist models require support and are such a bit more complex to print.
Hardware Used:
DIN 933 M5x45 Hex Bolt, https://www.mcmaster.com/#91280a244
DIN 933 M5x35 Hex Bolt, https://www.mcmaster.com/#91280a240
DIN 934 M5 Hex nut, https://www.mcmaster.com/#90591A260 or
DIN 1587 M5 Acorn Nut, https://www.mcmaster.com/#91880a037
| GoPro_Arm_90_Elbow.stl | 1003.5KB | |
| GoPro_Arm_Inline.stl | 92.2KB | |
| GoPro_Arm_Long_Inline.stl | 986.1KB | |
| GoPro_Arm_Long_Twist.stl | 709.7KB | |
| GoPro_Arm_Short_Twist.stl | 772.4KB | |
| GoPro_Bar_Mount_30.stl | 1.9MB | |
| GoPro_Bar_Strap_30.stl | 1.8MB | |
| GoPro_Screw_Long.stl | 715.0KB | |
| GoPro_Screw_Short.stl | 773.4KB | |
| GoPro_Screw_Threaded.stl | 432.7KB |
