Glue Roller, Leimroller 3D Printer Model
The file 'Glue Roller, Leimroller 3D Printer Model' is (stl,stp) file type, size is 36.2MB.
The file 'Glue Roller, Leimroller 3D Printer Model' is (stl,stp) file type, size is 36.2MB.
To use the V2, you still need the following parts.
1x e.g. Mister Rui paint roller https://amzn.eu/d/5402iAJ
Please remove the foam from the roller and press the remaining plastic roller into the printed roller with force.
To use the V3, you still need the following parts.
1x e.g. Mister Rui paint roller https://amzn.eu/d/5402iAJ
Here you only have to pull off the handle, i.e. the original roller andsimply put on the printed roller. If necessary, remove the 6 retaining bars with a knife, but please do not injure :-)
Explanation of the file name
Leimroller_v2_d40_l46mm.stl ≙ Name_Version_Diameter_Length.file format
Have fun with it
| leimroller_v2_d40_l46mm.stl | 14.7MB | |
| leimroller_v2_d40_l46mm.stp | 1.9MB | |
| leimroller_v2_d40_l60mm.stl | 19.5MB | |
| leimroller_v2_d40_l60mm.stp | 2.0MB | |
| leimroller_v3_d25_l46mm.stl | 8.9MB | |
| leimroller_v3_d25_l46mm.stp | 1.9MB | |
| leimroller_v3_d40_l46mm.stl | 13.9MB | |
| leimroller_v3_d40_l46mm.stp | 2.5MB | |
| leimroller_v3_d40_l60mm.stl | 18.9MB | |
| leimroller_v3_d40_l60mm.stp | 2.9MB |
