Geared Sith Holocron 3D Printer Model

Author: @
License: CC BY-NC-SA
File formats: stl,3mf
Download type: zip
Size:625.5KB

The file 'Geared Sith Holocron 3D Printer Model' is (stl,3mf) file type, size is 625.5KB.

Summary

Fully printable Sith holocron. Corners are mechanically linked so they spin together.

Assembly instructions:

  1. Print quantities as listed in the file name. I recommend using Prusaslicer's automatic painted supports for the gears.
  2. Install gear-2 in each of the 3 body corners (it slides right in)
  3. Press the 3x gold side triangles onto the 3x gear-2
  4. Orient gold side triangles so they sit flat on the ground
  5. Install gear-1 into the top body half (it slides in)
  6. Press the gold top triangle onto gear-1
  7. Make sure your corners are still aligned! Press the body corners together, then press the top triangle onto the corners to link gears
  8. Install the bottom body flat to tie the body together
  9. Spin the top triangle. You may need to run your gears in a little, but everything should spin together. If not, peel the body open and adjust or add grease
  10. Glue the red body and top triangle windows on for a splash of color

You can get some neat translucent effects by using a color swap after 1 or 2 layers on the windows. Play around and have fun.

The multi-color 3mf file is for people who have a multi-color system. It is not necessary to build a holocron.

Also available on Printables

1x_gear-1.stl 163.4KB
3x_gear-2.stl 156.8KB
gold-1x_body-sith-holocron.stl 550.2KB
gold-1x_top-triangle.stl 58.2KB
gold-3x_side-triangle.stl 30.1KB
red-3x_body-windows.stl 179.2KB
red-3x_top-triangle-window.stl 2.0KB
red-gold-1x_multicolor-body-sith-holocron.3mf 200.8KB