Remixed from Meisterodin's model: https://www.thingiverse.com/thing:1805621
Added a few more details: restraining bolt holes and sockets, some vents on the back and shoulder guards and some text, a few more details on head and an openable jaw. I also strengthened one of the waist joints as it broke off when inserting the ball. The core is made out of a standard glass marble which is 16mm diameter, black or dark red and held with epoxy. I know it normally would have an armor plate protecting the core but Ilike it as it is now. The jaw was supposed to be attached with a wire as an axle, but it stays in and moves just fine without it. I also made a second jaw with nubs on sides to form a tighter joint. If your joints are loose adding some super glue to the ball or inner part while detached may help, but with too much it might crack. I also have flipped one shin as they were not symmetrical, but the ones I printed out are the old ones as I only noticed that afterwards. The horn is a bit hard to print and it seems to come out best if printed vertical, also printing hands with fingers facing up is a good idea. It was definitely a good excuse to rewatch the series again in order to get some screenshots as reference material. The core.stl is just a ball, but it is the same scale as the rest so it can be used for scaling purposes. EVA_01-articulated.blend contains the unmodified model and can be used for reference as to how to assemble it properly.
| 01_feet_better.stl | 514.1KB | |
| 02_shins_better.stl | 1.2MB | |
| 03_thighs.stl | 349.2KB | |
| 04_pelvis.stl | 1.3MB | |
| 05_abdomen_better.stl | 592.8KB | |
| 06_knee_guards.stl | 11.6KB | |
| 07_torax_better.stl | 1.8MB | |
| 08_hands.stl | 90.6KB | |
| 09_forearms.stl | 167.8KB | |
| 09_forearms_better_2.stl | 1.8MB | |
| 10_arms_better_2.stl | 671.6KB | |
| 11_elbows.stl | 170.2KB | |
| 12_back_armor_better.stl | 80.2KB | |
| 13_chest_plate.stl | 55.7KB | |
| 14_shoulder_pads_better.stl | 128.0KB | |
| 15_shoulders_better.stl | 45.6KB | |
| 16_shoulder_pylons.stl | 10.2KB | |
| 17_head.stl | 644.4KB | |
| 17_head_better.stl | 674.4KB | |
| 17_head_movable2.stl | 679.9KB | |
| 17_jaw_movable_2.stl | 20.6KB | |
| 17_jaw_movable_3.stl | 20.4KB | |
| 18_horn.stl | 8.4KB | |
| 19_pallet_gun_split.stl | 307.0KB | |
| core.stl | 193.8KB | |
| EVA_01_chestplate_better.stl | 246.4KB |
