A T joint for 1.5 inch tubing. I designed it to replace one that broke on my Yamaha DTXpress 3.
Make sure to use strong plastic or else it will snap!
At least 3 perimeters and a high infill% is recommended :)
Supports are necessary, but they'll be a pain to remove. I found a dremel to be useful.
I ended up using a lighter to soften the plastic before pressing nuts into place.
I included the .SLDPRT files if you want to mess around with it.
| Drum_Socket.SLDPRT | 783.6KB | |
| Drum_Socket.STL | 7.0MB | |
| Drum_Socket_40mm.SLDPRT | 597.1KB | |
| Drum_Socket_40mm.STL | 4.5MB |
