Inspired by the Dungeons and Dragons Movie popcorn bucket, I decided to try and make my own. This does not match the size of the bucket and are modeled to fit my printer.
After working on the D20 I decided to try and build the remaining TTRPG dice in the same style.
I have done test prints on the d20 but have not printed the remaining parts yet.
Not recommended for actual dice rolling.
UPDATE: Test printing resulted in the numbers pulling away from surface on some models. Redid all models and replaced them with updates to fix the problem.
| 100D_-_Bottom.stl | 7.3MB | |
| 100D_-_Top.stl | 4.2MB | |
| 10D_-_Bottom.stl | 4.0MB | |
| 10D_-_Top.stl | 4.1MB | |
| D100_Rev_-_Bottom.stl | 7.8MB | |
| D100_Rev_-_Top.stl | 1.6MB | |
| D10_Rev_-_Bottom.stl | 8.1MB | |
| D10_Rev_-_Top.stl | 1.6MB | |
| D12--Top.stl | 1.2MB | |
| D12_-_Bottom.stl | 9.1MB | |
| D20_-Top.stl | 4.8MB | |
| D20_-_Bottom.stl | 5.5MB | |
| D4_-_Bottom.stl | 3.7MB | |
| D4_-_Top.stl | 5.3MB | |
| D6_-_Bottom.stl | 7.7MB | |
| D6_-_Top.stl | 1.9MB | |
| D8_-_Bottom.stl | 3.2MB | |
| D8_-_Top.stl | 3.2MB |
