Curtain rod holder where the rod easily can be mounted all the way to the ceiling.
Two parts, a bracket you mount to the wall and an arm. The same bracket is used no matter what arm length you have chosen. The parts should fit just fine without any scaling.
Max rod diameter is 25 mm (approx. 1 inch).
I have uploaded a few different arm lengths. The length indicate the distance from the wall to the center of the hook where the rod is placed.
The arm can be attached either from the side or by putting the base into the wall clamp in an angle and then lower the arm to lock it into place. Quick and convenient.
The ability to mount the arm into the wall bracket from the side makes it possible to have the rod mounted all the way to the ceiling.
The screws to mount the wall bracket will not be visible when the arm is in place.
The width of the arm and bracket is 27 mm (just over 1 inch). This makes it very strong.
Updates:
2020-02-09
| curtain_clamp_pole_100mm.stl | 173.9KB | |
| curtain_clamp_pole_120mm.stl | 172.6KB | |
| curtain_clamp_pole_140mm.stl | 169.1KB | |
| curtain_clamp_pole_160mm.stl | 172.9KB | |
| curtain_clamp_pole_180mm.stl | 167.2KB | |
| curtain_clamp_pole_200mm.stl | 164.8KB | |
| curtain_clamp_pole_50mm.stl | 100.1KB | |
| curtain_clamp_wall.stl | 37.8KB |
