Cubitos Sliding Lid Tray 3D Printer Model
The file 'Cubitos Sliding Lid Tray 3D Printer Model' is (stl,STL) file type, size is 135.1MB.
The file 'Cubitos Sliding Lid Tray 3D Printer Model' is (stl,STL) file type, size is 135.1MB.
Cubitos from AEG is a fantastic game with poor quality dice boxes. I wanted a dice tray and storage solution that I didn't have to worry about the lid for. I copied a little bit of the structure from a different model and changed it into a tray for the twelve 12mm dice. The lid is only a few layers thick so that it can flex appropriately.
4/03/24 Edit: Added a v2 that has better card holder, and assembly is slightly easier.
4/22/21 Edit: Added Blank and Nocut lids by request. Still working on a Final insert design but hit a few snags when up sizing the box.
5/7/21 Edit: Added another version with a deeper slot for cards and reduced the angle. They were falling out too easily...
| cubitos_dice-tray-dice-cap-v2.stl | 170.5KB | |
| cubitos_dice-tray-dice-main-v2.stl | 397.6KB | |
| Cubitos_Dice_Tray_Dice_Cap.STL | 52.4MB | |
| Cubitos_Dice_Tray_Dice_Cap_5degree.STL | 13.7MB | |
| Cubitos_Dice_Tray_Dice_Main.STL | 71.6MB | |
| Cubitos_Dice_Tray_Dice_Main_5degree.STL | 19.6MB | |
| Cubitos_Lid_Beaver.STL | 26.7MB | |
| Cubitos_Lid_Blank.STL | 837.7KB | |
| Cubitos_Lid_Cat.STL | 26.9MB | |
| Cubitos_Lid_Cheese.STL | 26.9MB | |
| Cubitos_Lid_Dino.STL | 26.5MB | |
| Cubitos_Lid_Dog.STL | 26.7MB | |
| Cubitos_Lid_Nocut.STL | 788.9KB | |
| Cubitos_Lid_Peace.STL | 25.7MB | |
| Cubitos_Lid_Shield.STL | 25.5MB | |
| Cubitos_Lid_Sword.STL | 26.1MB |
