The file 'Corkscrew 3D Printer Model' is (stl) file type, size is 3.3MB.
I scaled the curve to 1:64. But the scale of the Rails is 1:32.
Please follow the instructions to assemble the Model.
Good Luck!
;-)
| Footer_Rail_045.stl | 50.5KB | |
| Footer_Support_045.stl | 59.5KB | |
| Footer_Support_055.stl | 59.5KB | |
| R01_P01.stl | 515.2KB | |
| R01_P02.stl | 415.2KB | |
| R01_P03.stl | 88.2KB | |
| R01_P04.stl | 400.1KB | |
| R01_P05.stl | 400.1KB | |
| R01_P06.stl | 416.1KB | |
| R01_P07.stl | 126.5KB | |
| R01_P08.stl | 381.3KB | |
| R01_P09.stl | 518.5KB | |
| R01_P10.stl | 55.9KB | |
| R02_P01.stl | 518.5KB | |
| R02_P02.stl | 400.1KB | |
| R02_P03.stl | 415.5KB | |
| R02_P04.stl | 125.1KB | |
| R02_P05.stl | 400.1KB | |
| R02_P06.stl | 400.1KB | |
| R02_P07.stl | 381.3KB | |
| R02_P08.stl | 518.5KB | |
| R02_P09.stl | 55.9KB | |
| S01_P01.stl | 116.5KB | |
| S01_P02.stl | 164.5KB | |
| S02_F01.stl | 59.5KB | |
| S02_P01.stl | 116.5KB | |
| S02_P02.stl | 115.3KB | |
| S02_P03.stl | 163.9KB | |
| S02_P04.stl | 176.6KB | |
| S02_P05.stl | 114.7KB | |
| Support_Plate_045.stl | 90.1KB | |
| Support_Plate_055.stl | 90.1KB | |
| Track_SupportConnector.stl | 11.2KB |
