Collection Of Hose Pipe Brackets, Clamps, Standoff’s 3D Printer Model
The file 'Collection Of Hose Pipe Brackets, Clamps, Standoff’s 3D Printer Model' is (stl) file type, size is 58.0KB.
The file 'Collection Of Hose Pipe Brackets, Clamps, Standoff’s 3D Printer Model' is (stl) file type, size is 58.0KB.
A collection of brackets to hold 13mm hose pipes, including stand offs to allow for hoselock type fittings.
I've been working on an irrigation project for my garden, and found the need to make a couple of brackets to hold my hose, giving standoff room for hoselock fittings.
A quick project in Tinkercad and a quick print solved my problem. I then went back and designed a number of variations, some of which I've since used, and some which you may find useful.
I may add more clamps - as my garden project continues.... (2019/2020)
New - Added 19.07.19 a 36mm bracket to hold a hoselock adaptor (see photo). 'Quick Release' in that you thread in the hose, then slide the hoselock adaptor into the bracket,
My favorite bracket so far has to be the single screw quick release.
Ive printed mine at .3mm in PLA, no supports, 20% inflill. The print quality is fine for the purpose, but I dont honestly expect the PLA to last in the garden for more than a few years. Best to use a filament like ABS for long term use.
| Hose_Pipe_Bracket_-_Captured_-_dual_screw.stl | 36.2KB | |
| Hose_Pipe_Bracket_-_Captured_with_clearance_-_dual_screw.stl | 35.8KB | |
| Hose_Pipe_Bracket_-_Quick_Release_-_Single_Screw.stl | 41.7KB | |
| Hose_Pipe_Bracket_-_Quick_Release_With_Clearance_-_dual_screw.stl | 47.2KB | |
| Hose_Pipe_Bracket_-_Quick_Release_With_Clearance_-_Single_Screw.stl | 41.6KB | |
| Hose_Pipe_Bracket__-_Captured_-_Single_Screw.stl | 22.5KB | |
| Hozelock_connector_bracket_-_single_screw.stl | 43.8KB |
