It consists of 3 Files:
Star.stl => The Main Body. I tried to design it in a way, that no supports are needed and the amount of Material needed is also quite low. At the lower part of the body there is a hole, so that e.g. wiring for LEDs can be placed there.
StarTop.stl => The Frontcover. It should snap in easily. The inner part is 0.4 mm high (2 Layers if printed with suggestet 0.2 Layer Height) so that any LED that might be placed inside can shine trough
StarMount.stl => The MountingPole. I glued it with superglue to the Star.stl.
I used 0.2 mm clearances, so the parts should fit quite good.
TWO-COLOR:
If you want tho print the Eyes in another color, just Use
Cura => Menu => Extensions => Post Processing => Modify G-Code
Add a Script => Pause at Height => Height: 1,4mm (or Layer 7, if you print in 0.2)
Fusion 360 File is included, feel free to adapt it to your needs :)
| Star.stl | 443.8KB | |
| StarMount.stl | 138.2KB | |
| StarTop.stl | 345.6KB |
