Can be used to keep cables in corners and walls. Number of cables and diameters can be customized, so the sizes and edge rounds.
The radiuos of cable bending can be set. Be aware that bending too much a cable may break it. Standar electrical power use 4 x diameter, so a 7mm cable requires a bend radious of 28mm.
| Cable_corner.scad | 9.0KB | |
| Cable_corner_1.stl | 2.4MB | |
| Cable_corner_1R.stl | 99.9KB | |
| Cable_corner_2.stl | 3.0MB | |
| Cable_corner_2R.stl | 127.0KB |
