Brick And Wood Shelf Brackets 3D Printer Model
The file 'Brick And Wood Shelf Brackets 3D Printer Model' is (stl) file type, size is 2.7KB.
The file 'Brick And Wood Shelf Brackets 3D Printer Model' is (stl) file type, size is 2.7KB.
In creating some el-cheapo brick and board shelves in my basement, I decided to secure them with some brackets so they would be less prone to toppling.
The H bracket goes between the bricks, and the T bracket goes around the boards. You can optionally use screws to secure the T bracket to the boards. The screw holes are offset so your screws don't ram into each other. The screw holes are meant to be guides for drilling, you'll need to drill out some material to make it large enough for your screws.
Edit in Tinkercard:
https://www.tinkercad.com/things/9edVyddbHWG/edit
https://www.tinkercad.com/things/dHTIcVzfhdS/edit
| Brick_Shelf_H.stl | 2.2KB | |
| Brick_Shelf_T.stl | 12.3KB |
