Bobbin originally designed for classic Elna sewing machines but should be customizable to work for any sewing machine. Our Elna machine came with one metal bobbin that was approximately 21 x 11 mm. This bobbin is by default 20.1 x 10.8 mm although you can adjust it using OpenSCAD or the Customizer (if it's working). I recommend using this slightly smaller size in a 1970s Elna machine as the plastic is not as slippery as metal.
This is a two part design. It is a tight fit and hard to get apart once together. I do recommend applying a dab or two of super glue on the inside of the bigger piece. Then push together the two halves (it may take a little bit of force and you need to align them just right). After the bobbin is together, wipe the inside bore to ensure no glue remains (there is a small empty space that should trap most/all of a small amount of excess).
| Elna_Bobbin.scad | 2.3KB | |
| Elna_Bobbin.stl | 604.4KB |
![Mini Crosswalk Light With Changeable Signs [New Update 11/5/2023] 3D Printer Model](https://res.3axis.co/867dc6e0-6843-4d0c-a42e-2a5902710c74/images/aabf5920-7891-4eb9-94f9-283d379dcb53_thumb.jpg)
