I DL'd the original file here but it was terrible and every piece needed to be re-modeled. I did the chore and this is the result. I've printed two now successfully. There are 52 pieces in all, grouped into 13 prints. This is intended as a static display model. It does not shoot anything. The only functionality is the bolt and spring do cycle and the clip is removable. I have plans to modify further so collapsible stock can open, but right now you have to choose when building it open or closed stock. I will add close up pics of finished model after I airbrush it.
| Print_group_A.stl |
| Print_group_A.x3g |
| Print_group_B_.stl |
| Print_group_B_.x3g |
| Print_group_C_.stl |
| Print_group_C_.x3g |
| Print_group_D_.stl |
| Print_group_D_.x3g |
| Print_group_E_.stl |
| Print_group_E_.x3g |
| Print_group_F.stl |
| Print_group_F.x3g |
| Print_group_G.stl |
| Print_group_G.x3g |
| Print_group_H.stl |
| Print_group_H.x3g |
| Print_group_I.stl |
| Print_group_I.x3g |
| Print_group_J.stl |
| Print_group_J.x3g |
| Print_group_K.stl |
| Print_group_K.x3g |
| Print_L.stl |
| Print_L.x3g |
| Print_M.stl |
| Print_M.x3g |
