Anti-Vibration Puck Mount For Meade LX-90 Telescope ( & Beer Holder) 3D Printer Model
The file 'Anti-Vibration Puck Mount For Meade LX-90 Telescope ( & Beer Holder) 3D Printer Model' is (scad,stl) file type, size is 77.0KB.
The file 'Anti-Vibration Puck Mount For Meade LX-90 Telescope ( & Beer Holder) 3D Printer Model' is (scad,stl) file type, size is 77.0KB.
I have 3 anti-vibration pucks (3" diameter) used under the legs of my Meade LX-90 Telescope's tripod. This is a bracket/holder that allows me to stack them on top of the spider arms of the tripod when they are not in use, carry them outside with the tripod/telescope, and then transfer them to under the legs.
As a bonus, a beer or other beverage can fits into the holder when the pucks are in use.
The STL file is sized for a 1/4-20 bolt or pan head screw (I used a 1" one with a matching 1/4-20 wingnut on the bottom) and three pucks that are 3" diameter and approximately 1" high. The specific pucks I use and recommend can be found here: https://amzn.to/4ggvAVv
You can easily adjust the size of the puck hole or screw holes by editing the parameters of the .SCAD file with OpenSCAD.
| VibrationPuckHolder.scad | 1.0KB | |
| VibrationPuckHolder.stl | 253.8KB |
