English: The Anisoptera Racer is a Nano sized FPV racer with a Micro Scisky board, 1 & 2s Batteries, designed to be simply 3D Printed. designed for the Drone race of the Toulouse Fablab festival.
Français: L'Anisoptera Racer est un quadricoptere FPV de taille Nano < 60g, contrôlé par une carte Micro Scisky, et adapté aux batteries 1 et 2s. Ce modele as été conçu pour la course de nano drones du Fablab festival de Toulouse et imprimable et assemblable simplement.
1s -> 47g
2s ->55g
English:Parts List for a nano FPV racer set-up :
French: Liste des composants nécessaire pour la fabrication de l'Anisoptera Racer
Propeller/Helices -> Banggood: JJRC 1000 Props
Motors/Moteurs -> Banggood: Hubsan H107C Motors or Amazon: Hubsan H107C Motors
Control/Controleur -> Banggood: Micro Scisky control board or HobbyKing: Quantum pico control board
Batteries -> HobbyKing: 260mAh 35c 1s batt or For the brave 2s seems to work but maybe not for long / Pour les plus téméraire il est possible de l'utiliser aver des batteries 2s mais la durée de vie des motors est alors trés limité -> HobbyKing: 2S Batt
Cam -> Banggood: CMOS 170Deg Cam
OSD (optional) / Optionnel -> Banggood: Micro MinimOSD
AV-Transmit/Emmeteur Video -> preferably/preferablement Banggood: 25mW transmitter or Banggood: 200mW transmitter
And finally a 33nf capacitor to be connected on the video power to filter the interference from the engine.
Configuration: Install Betaflight on the controller: https://github.com/borisbstyle/betaflight/releases/
V0.9 -> Flat bottom to reduce need for support
V0.8 -> V0.7 became very hard to destroy, but I finally managed tot do it for here is V0.8 with some strength improvements.
V0.7 -> Arm base reinforcements again, Engine end stop reinforcements, transversal bar adaptation
V0.6 -> Arm base reinforcements & First FPV videos
V0.51 -> Update to resolve printing issues, James Dean version Very intense life but short holding of motors, size reduced, battery space adapted to hold 1s 750mha
V0.5 -> Fuselage resize for 2S 300mah Turningy Bat
V0.4 -> 9.8g -> fuselage resize, arm attachments resize
V0.3 -> 9g -> Motor wire passage adapted Again, Arm reinforcement reduced, Better
V0.2 -> 11.7g -> Motor wire passage adapted, battery space adapted, arms reinforced.
V0.1 -> 10.0g -> Initial model
Made in Fablab Artilect: https://artilect.fr/dronelab/
https://youtu.be/RcJcHMlQvyw
https://youtu.be/PNofi0aoptI
https://youtu.be/dBOKuYc3jXQ
https://youtu.be/Y-fJJdXfXks
| AnisopteraRacer_Frame_1s_V0.7.scad | 6.1KB | |
| AnisopteraRacer_Frame_1s_V0.7b.scad | 6.1KB | |
| AnisopteraRacer_Frame_1s_V0.7b.stl | 1.1MB | |
| AnisopteraRacer_Frame_1s_V0.7stl.stl | 1.1MB | |
| AnisopteraRacer_Frame_1s_V0.8.scad | 6.2KB | |
| AnisopteraRacer_Frame_1s_V0.8.stl | 1.2MB | |
| AnisopteraRacer_Frame_1s_V0.8b.scad | 6.2KB | |
| AnisopteraRacer_Frame_1s_V0.8b.stl | 1.1MB | |
| AnisopteraRacer_Frame_1s_V0.9.scad | 6.5KB | |
| AnisopteraRacer_Frame_1s_V0.9.stl | 1003.9KB | |
| AnisopteraRacer_Frame_2s_V0.7b.stl | 1.1MB | |
| AnisopteraRacer_Frame_V0.1.scad | 5.3KB | |
| AnisopteraRacer_Frame_V0.1.stl | 1.3MB | |
| AnisopteraRacer_Frame_V0.2.scad | 5.3KB | |
| AnisopteraRacer_Frame_V0.2.stl | 1.2MB | |
| AnisopteraRacer_Frame_V0.3.scad | 5.3KB | |
| AnisopteraRacer_Frame_V0.3.stl | 1.3MB | |
| AnisopteraRacer_Frame_V0.4.scad | 5.3KB | |
| AnisopteraRacer_Frame_V0.4.stl | 1.2MB | |
| AnisopteraRacer_Frame_V0.5.scad | 5.7KB | |
| AnisopteraRacer_Frame_V0.5.stl | 1.2MB | |
| AnisopteraRacer_Frame_V0.6.scad | 6.3KB | |
| AnisopteraRacer_Frame_V0.6.stl | 1.2MB | |
| AnisopteraRacer_Frame_V0.7.scad | 5.6KB | |
| AnisopteraRacer_Frame_V0.7.stl | 1.2MB | |
| AnisopteraRacer_Frame_V0.7b.scad | 6.0KB |
![The Microblivion [65mm / Toothpick] 3D Printer Model](https://cdn.3axis.co/assets/79/26/4d/ba/79264dba-d87a-4ea9-bba6-afbad44b27f9/images/8fc65be1-5116-4a05-ae61-98838d06451e_thumb.jpg)
