Angled Fore Grip Mlok AFG M-LOK Without Side Mounts 3D Printer Model
The file 'Angled Fore Grip Mlok AFG M-LOK Without Side Mounts 3D Printer Model' is (stl,3mf,f3d) file type, size is 53.5MB.
The file 'Angled Fore Grip Mlok AFG M-LOK Without Side Mounts 3D Printer Model' is (stl,3mf,f3d) file type, size is 53.5MB.
Hello there,
Full credit to user Rusty__Shackleford for this great model "Angled fore grip mlok AFG M-LOK"
I just remixed it by cutting side mount which didn't really worked for me, also took me too much time thinking about good angle for it to print... one of sidemounts failed anyway, so here it is.
M3F File = STL File BUT BETTER
UPDATE!
Just uploaded 2nd version with one screw moved to the back (instead in middle part), so it's not bending as much, Also v2 is more stiff, additionally replaced front cut with finger notch, and remodeled few parts to make it does not need support above "mounting plate part", so You can use "Touch platform only/Touching buildplate" in support settings. :)
... unless You are not struggling with overhang, then lower angle is 34 or (in slicer) 56 degrees.
| M-LOK_AFG_high_support_no_side_mounts.stl | 352.5KB | |
| M-LOK_AFG_v2.3mf | 364.7KB | |
| M-LOK_AFG_v2.f3d | 25.9MB | |
| M-LOK_AFG_v2.stl | 1.3MB | |
| M-LOK_AFG_v3.3mf | 664.5KB | |
| M-LOK_AFG_v3.f3d | 25.4MB | |
| M-LOK_AFG_v3.stl | 2.5MB |
