Airsoft AK Bullpup Conversion Kit 3D Printer Model Free Download

3D Printer Models

Airsoft AK Bullpup Conversion Kit 3D Printer Model

Author: @Goblins

License: CC BY-NC-ND

File formats: stl

Download type: zip

Size:987.9KB

The file 'Airsoft AK Bullpup Conversion Kit 3D Printer Model' is (stl) file type, size is 987.9KB.

Description Files (7)

Summary

Requirements:
-Airsoft rifle - AK type Marui spec or similar

Font rails (needed to mount new trigger assembly)
basic tech capabilities
micro switch FCU with electronic cut-off (Known types: Gate titan V3, Jefftron V3 processor)

Hardware needed:
2x M5x12
2x M5x30
1x M5x18
5x M5 nut
5x M3x12
2x M3x18
1x M3 nut
6x Brass insert (M3 inner, 5mm outer)
pen spring
small square button micro-switch
24AWG signal wire
1.5mm metal rod for trigger axle

Instructions:

install FCU
remove trigger and solder signal wires to the FCU microswitch
solder the other side of signal wires to new microswitch and glue it in place
- best to add micro connector for the new microswitch for easier disassemble
glue in the bolt and spring as shown in picture to trigger assembly.
assemble the trigger assemble (rod,spring etc)
install the old trigger cover
insert the 6 thread inserts like shown in picture to back plate
assemble as see fit.

NOTICE: its a DIY mod, any damage is modders responsibility only !
all parts can be printed without supports !
if you like it please donate

buttplate.stl	678.8KB
Front_trigger.stl	1.7MB
Front_trigger_misc.stl	284.7KB
side_panel_1-2.stl	71.1KB
side_panel_2-2.stl	71.1KB
trigger_fill_1-2.stl	105.6KB
trigger_fill_2-2.stl	86.5KB

Airsoft AK Bullpup Conversion Kit 3D Printer Model

Summary

Tags

You might also like