3d printed gyroscope can be printed out of any solid matirails
bearings used are 608 standart bearings-6 units
assembling:
m2 nuts heat inserted to every parts with hexagonal holes
and then screw in the other side of the part with m2 bolts
insert bearings in the required places and screw the stands to a piece of wood
you can fill the flywheel(the center of the gyro) with a dense matirial in my case I filles the middle with play-doh and the outer holes with oval magnets
use:
stick the holder on one of the side of the guro and wind a string on the flywheel pull the string to spin the gyro and take off the holder move the system and wacth the gyro do his thing
Enjoy!!!
| Base_stands_print_2.stl | 3.4MB | |
| Fly_wheel_center_of_gyro_side_1.stl | 4.7MB | |
| Fly_wheel_center_of_gyro_side_2.stl | 4.7MB | |
| holder.stl | 1.4MB | |
| Inner_ring_-_Inner_ring_side1.stl | 4.1MB | |
| Inner_ring_-_Inner_ring_side_2.stl | 4.3MB | |
| Outer_ring_-_Outer_ring_side_1.stl | 4.8MB | |
| Outer_ring_-_Outer_ring_side_2.stl | 5.0MB |
