30 Pin, USB-C, ESP-32 Enclosure For Battery Powered WLED Projects 3D Printer Model
The file '30 Pin, USB-C, ESP-32 Enclosure For Battery Powered WLED Projects 3D Printer Model' is (stl) file type, size is 143.7KB.
The file '30 Pin, USB-C, ESP-32 Enclosure For Battery Powered WLED Projects 3D Printer Model' is (stl) file type, size is 143.7KB.
This is an enclosure designed for a 30-pin USB-C ESP32, intended for use with a WLED project.
The case features three ports: one for a USB cable that powers the LEDs, one for the LED connector (typically included with the light strips), and a USB-C port for the ESP32. Additionally, there are vents to allow proper ventilation for the ESP32.
I opted for dual USB connections to provide more stable power to the ESP32 and to increase the amperage to the light strip by using its own dedicated port.
The top is secured with a 3.8mm screw, though many similar sizes should work if properly fitted.
Edit: Fixed lid alignment to printbed.
| ESP32_-_WLED_Enclosure_v6.stl | 596.9KB |
