120mm M829A3 APFSDS-T 3D Printer Model
The file '120mm M829A3 APFSDS-T 3D Printer Model' is (stl) file type, size is 3.6MB.
The file '120mm M829A3 APFSDS-T 3D Printer Model' is (stl) file type, size is 3.6MB.
A 1/3rd Scale 120mm Armor Piercing, Fin Stabilized, Discarding Sabot - Tracer (APFSDS-T) round used by some NATO main battle tanks such as the M1 Abrams.
Print out 3x each of Sabot 1, Sabot 2 and Sabot 3. Requires some assembly (superglue), it helps to be an octopus... I used a piece of the penetrator to serve as a guide to ensure the sabot pieces lined up correctly while the glue dried. There is still a bigger gap between sabot petals than I would have liked, but it helped reduce some fitment issues.
A test print on a CR-10 came out satisfactorily, but it may require some light sanding and minor fitting. I tweaked the design very slightly after the test print to improve fitting, so if you encounter any issues let me know.
In the future I may add cavities in the sabot petals for magnets to help keep it together while it's not in the case. Enjoy!
| Case.stl | 1021.9KB | |
| Combustable_Case.stl | 261.7KB | |
| Coupling.stl | 182.7KB | |
| Penetrator1.stl | 1.9MB | |
| Penetrator2.stl | 4.7MB | |
| Penetrator3.stl | 4.4MB | |
| Penetrator4.stl | 129.7KB | |
| Penetrator_Plug.stl | 75.6KB | |
| Sabot_1.stl | 1.3MB | |
| Sabot_2.stl | 1.1MB | |
| Sabot_3.stl | 1.2MB |
