Simple laser cut storage box using 3mm ply and M3x16 bolts with captive nuts. I use a circle cut in the front to pull the box off the shelf but could also be fitted with a handle.
Sized to fit onto some existing shelving I have, and to fit the limited cutting area of my cheap Chinese laser cutter. Could fairly easily be increased/decreased in size to fit your purpose.
Should be fine in 3mm acrylic as well but any other thickness of material would need a re-design.
Fit the back piece onto the base first, then fit the sides before finally fitting the front.
| simple_3mm_storage_boxes.dxf | 204.6KB |
