Scrabble Board Laser Cut
The file 'Scrabble Board Laser Cut' is (dxf,pdf,lbrn) file type, size is 355.8KB.
The file 'Scrabble Board Laser Cut' is (dxf,pdf,lbrn) file type, size is 355.8KB.
A Scrabble board and pieces
I wanted to shade the different multiplyers by their value, so depending on what you're cutting you'll need to adjust different shading strengths for the fill profiles. Below are what each layer should be, colours are based on the supplied PDF. I recommend filling objects individually and that you leave the cut layer till last.
Also if you're cutting on cardboard, small things like scabble pieces are best cut on an angle that way you get a wavy effect on all sides, so you can either rotate them and cut on the same layer as the board, or you can do what I did, etch and cut the board, then rotate the work piece 45 degrees and run the job (But you use more material.)
layer 06 (cyan) line etch
layer 04 (mustard) fill +line etch (light)
layer 03 (green) fill +line etch (medium)
layer 05 (orange) fill + line etch (dark)
layer 01 (blue) fill + line etch (extra dark)
layer 00 (black) line cut
layer 07 (pink) fill + line etch (medium)
layer 08 (grey) line cut
| Scrabble.dxf | 1.1MB | |
| Scrabble.pdf | 106.9KB | |
| Scrabble_bits.lbrn | 602.6KB |
