Does your European railroad need semaphores? These will signal a new era on your layout.
Video of them in action:
https://www.youtube.com/watch?v=b_TBFBmJF5M
This is my first design that requires a SLA(resin) printer for the masts. They turned out great with lots of little details. The front panels and blades were still printed on a FDM(PLA) printer.
The masts and panels come in 8, 10 and 12 meter tall varieties and have single and dual lamps.
You will also need:
0402 Warm White LEDs
0.2mm Brass Rod
M1-1.8mm 5mm Long Eyeglass Screws
SG90 Servo
The masts can also be used with my other working semaphores spectacles.
Links to code and other details are covered in my working semaphore thing below:
| Blades_Left.stl | 3.1MB | |
| Blades_Right.stl | 3.1MB | |
| Mast_10m_Dual.stl | 3.3MB | |
| Mast_10m_Dual_Supported.stl | 4.6MB | |
| Mast_10m_Single.stl | 2.8MB | |
| Mast_10m_Single_Supported.stl | 4.1MB | |
| Mast_12m_Dual.stl | 3.4MB | |
| Mast_12m_Dual_Supported.stl | 4.7MB | |
| Mast_12m_Single.stl | 2.9MB | |
| Mast_12m_Single_Supported.stl | 4.3MB | |
| Mast_8m_Dual.stl | 3.6MB | |
| Mast_8m_Dual_Supported.stl | 4.8MB | |
| Mast_8m_Single.stl | 2.9MB | |
| Mast_8m_Single_Supported.stl | 4.1MB | |
| Panel_10m_Dual.stl | 291.9KB | |
| Panel_10m_Single.stl | 337.2KB | |
| Panel_12m_Dual.stl | 340.7KB | |
| Panel_12m_Single.stl | 293.1KB | |
| Panel_8m_Dual.stl | 243.1KB | |
| Panel_8m_Single.stl | 288.4KB |
