The file 'Level 2 Walkway Platform 8×8 Cm For 3mm Laser Cut MDF' is (ai,cdr,dxf,pdf) file type, size is 1.9MB.
This is a small modular walkway platform which is part of my Necromunda terrain collection. The original was designed to be cut in 4mm material and the files have been converted to 3mm. Pictures are of the original.
The files let you make a level 2 walkway platform with supports. Each level has two narrow connection points where you can attach walkways, stairs, guard rails or similar. One of the floor plates also has an opening in the floor where you can attach this ladder:
https://www.thingiverse.com/thing:2882485
To make the complete structure, print one of each floor plate and two supports.
For assembling the supports, glue the vertical sides together first, then add the bottom and top pieces. For the floor plates, start by gluing the vertical U-shaped connection point pieces to the floor. Then add the long railing pieces and finally the short supports for the railing.
Dimensions are roughly 8x16x20 cm (XYZ)
Black = cut
Red = engrave
NOTE: There is no level 3 walkway platform, but you can make one if you wish by printing three floor plates and the long supports from this building:
https://www.thingiverse.com/thing:2863219
| support_medium_3mm.ai | 967.0KB | |
| support_medium_3mm.cdr | 417.1KB | |
| support_medium_3mm.dxf | 380.9KB | |
| support_medium_3mm.pdf | 391.9KB | |
| walkway_platform_8x8_1_3mm.ai | 36.6KB | |
| walkway_platform_8x8_1_3mm.cdr | 418.4KB | |
| walkway_platform_8x8_1_3mm.dxf | 415.3KB | |
| walkway_platform_8x8_1_3mm.pdf | 10.9KB | |
| walkway_platform_8x8_2_3mm.ai | 49.3KB | |
| walkway_platform_8x8_2_3mm.cdr | 42.7KB | |
| walkway_platform_8x8_2_3mm.dxf | 426.4KB | |
| walkway_platform_8x8_2_3mm.pdf | 16.8KB |
