The file 'Level 1 Narrow Octagonal Building For 3mm Laser Cut MDF' is (ai,cdr,dxf,pdf) file type, size is 2.7MB.
This is a modular tower which is part of my Necromunda terrain collection. The original was designed to be cut in 4mm material, and the files have been converted to 3mm. Pictures are of the original.
The files lets you make a level 1 narrow tower. It has four narrow connection points where you can attach walkways, stairs, ladders, etc. The following are just some examples:
https://www.thingiverse.com/thing:2911559
https://www.thingiverse.com/thing:2870065
https://www.thingiverse.com/thing:2882460
https://www.thingiverse.com/thing:2915692
For one complete tower print four supports and one floor plate. The supports and floor plates are interchangeable with the other sets in the same series, so you can mix and match if you like.
For assembling the supports, glue the vertical sides together first, then add the bottom and top pieces. For the floor plates, start by gluing one U-shaped connection point piece to the floor piece, and work your way around shape. It's important that you attach everything before the glue sets, or you will have trouble fitting the last piece.
Dimensions are roughly 17x17x12 cm (XYZ)
Black = cut
Red = engrave
| oct_12x12_3mm_1.ai | 965.7KB | |
| oct_12x12_3mm_1.cdr | 424.6KB | |
| oct_12x12_3mm_1.dxf | 392.9KB | |
| oct_12x12_3mm_1.pdf | 389.3KB | |
| support_short_3mm.ai | 957.4KB | |
| support_short_3mm.cdr | 409.9KB | |
| support_short_3mm.dxf | 278.6KB | |
| support_short_3mm.pdf | 387.0KB |
