Ravenclaw house badge. I left a space for a straight pin but ended up using a brooch pin instead.
This was cut from 3mm hardwood plywood. I covered the cut area with masking tape and sprayed the dark areas with black spray paint.
Cut out some blue paper and glue it to the back of the base layer then glue the other layers together. I then coated it with a generous layer of resin (I used Art Resin). The resin would be required if using a brooch pin or it is unlikely that there will be sufficient material to glue the pin to.
| Ravenclaw_cuttable.pdf |
| Ravenclaw_cuttable.svg |
