Laser Cut Raspberry Pi Model B+ Or Pi2 Model B Case
The file 'Laser Cut Raspberry Pi Model B+ Or Pi2 Model B Case' is (dxf,eps,pdf,svg) file type, size is 395.9KB.
The file 'Laser Cut Raspberry Pi Model B+ Or Pi2 Model B Case' is (dxf,eps,pdf,svg) file type, size is 395.9KB.
A free and open source case for a Raspberry Pi model B+ or a Raspberry Pi 2 model B
The original PDF file from Pi-Supply was scaled too small, it is now scaled at 100% and can be used to send to a laser cutter as it is.
I have also added the attribution text to the base of the case as required by the CC-BY-SA license.
The top of the case also features the Ipswich Makerspace logo
This model is made out of 3mm hard board, I think it is actually very slightly thicker than 3mm so some of the tabs were a bit tight. If made from 3mm acrylic is should all go together fine.
Revision 3 - power socket hole has been enlarged.
| Pi-supply_case_rev_3.dxf | 91.1KB | |
| Pi-supply_case_rev_3.eps | 131.5KB | |
| Pi-supply_case_rev_3.pdf | 120.2KB | |
| Pi-supply_case_rev_3.svg | 356.6KB |
