The file 'Laser Cut Memo Dispenser For A Magnetic Bulletboard Cnc/laser' is (obj,dxf,pdf,svg) file type, size is 300.7KB.
As one of my first creations with my cnc I tried a replacement for a diy-memo-dispenser using a dovetailed construction. It can hold up to four pens and a lot of small slips of paper. The dispenser is designed to be used on a bulletboard thus I inserted two neodymium-magnets in the back panel.
After a year of usage I revised it with a lower back (using less material) and painted it black so that the marks of pens and pencils are less obvious.
This build was done on a desktop cnc-machine by Stepcraft from 4 mm poplar plywood using a spiral-toothed 1.2 mm flute. I used some spray-paint and sanded it.
A laser cutter might be a good alternative tool to rebuild the design. In this case the nesting could be even closer. In my case I optimized the layout for my machine width of 30 cm.
Visit https://www.zenziwerken.de/en/ for more designs.
| Zettelhalter-Parts.obj | 505.9KB | |
| Zettelhalter.dxf | 290.3KB | |
| Zettelhalter.obj | 541.9KB | |
| Zettelhalter.pdf | 50.7KB | |
| Zettelhalter.svg | 6.6KB |
