Laser Cut 2oz Acrylic Paint Rack / Storage Box
The file 'Laser Cut 2oz Acrylic Paint Rack / Storage Box' is (svg,scad) file type, size is 28.1KB.
The file 'Laser Cut 2oz Acrylic Paint Rack / Storage Box' is (svg,scad) file type, size is 28.1KB.
Lasercut organization rack for 2oz paints. (OpenScad file allows you to change the hole diameter size, so you could customize it for spice racks or other sized paints.)
Pre-rendered SVG files has the tabs sized for 5.2mm/0.20in (min) to 6mm/0.235in (max) thick plywood. Again, you can change those parameters in the OpenScad file to use different thickness plywood.
You can see a demo of two of these racks hinged together here:
https://www.youtube.com/watch?v=TdumNXlIYQg
You can see a "how to assemble" video here:
https://www.youtube.com/watch?v=7yiNBzzkvIM
The hinges I used were from here:
https://www.prusaprinters.org/prints/105612-geared-hinge
I printed them at 75%. The pins I custom made for them, which you can find here:
https://www.thingiverse.com/thing:5255883
| paint-storage-bottom.svg | 1.1KB | |
| paint-storage-Level1.svg | 14.6KB | |
| paint-storage-Level2.svg | 20.7KB | |
| paint-storage-Level3.svg | 29.9KB | |
| paint-storage-Level4.svg | 27.4KB | |
| paint-storage-rear.svg | 2.5KB | |
| paint-storage-side-handle-left.svg | 2.6KB | |
| paint-storage-side-handle-right.svg | 2.6KB | |
| paint-storage.scad | 6.7KB |
