Remix of my original Rugged Storage Box with a new snap closure and easy two-finger opening.
Check out the video:
https://youtu.be/GLi2h6P3wFk
and take a look at Version 2 of my waterproof box:
https://www.thingiverse.com/thing:4838803
The cam-latch closure on my original rugged box is still the toughest 3D printed box closure of all, but I know snap closures are convenient too. I made this extra tough snap closure, which will not break because it doesn't rely on layer adhesion. Even if you do somehow manage to break it, the catch can be replaced with a single screw.
Features:
Requires 8x M3 x 20mm screws.
Tested in PLA and PETG, should work with any rigid filament.
Assembly Guide Video:
https://youtu.be/at3_RNBc5bM
My Universal Project Box:
https://www.thingiverse.com/thing:4801005
My Original Rugged Box:
https://www.thingiverse.com/thing:3338826
Check out my other designs including 3D Printed Hi-fi speaker projects and subwoofer speakers:
https://www.thingiverse.com/thing:5077425
https://www.thingiverse.com/thing:4980197
Want a battery holder? Check this one out:
https://www.thingiverse.com/thing:4982271
| 110x60x30mm.zip | 2.0MB | |
| 120x60x35_zx82net_rugged_box_2a_v1_Bottom_solid_zx82net_rugged_box_2a_v1.stl | 1.5MB | |
| 120x60x35_zx82net_rugged_box_2a_v1_Bottom_with_Lanyard_zx82net_rugged_box_2a_v1.stl | 2.0MB | |
| 120x60x35_zx82net_rugged_box_2a_v1_Bottom_zx82net_rugged_box_2a_v1.stl | 1.8MB | |
| 120x60x35_zx82net_rugged_box_2a_v1_Fill_zx82net_rugged_box_2a_v1.stl | 346.8KB | |
| 120x60x35_zx82net_rugged_box_2a_v1_Top_zx82net_rugged_box_2a_v1.stl | 1.5MB | |
| 150x80x30mm.zip | 1.8MB | |
| 150x80x50mm.zip | 1.9MB | |
| 160x50x130mm.zip | 2.1MB | |
| 160x55x35mm.zip | 2.0MB | |
| 180x110x50mm.zip | 1.8MB | |
| 180x110x90mm.zip | 1.9MB | |
| hinge.stl | 765.7KB | |
| Ultimate_Box_Snap_Latch_zx82net_rugged_box_2a_v2.stl | 140.0KB | |
| zx82net_rugged_box_2a_-_Snap_Latch.f3d | 2.6MB | |
| zx82net_rugged_box_2a_STP.step | 2.3MB |
