Hello together!
Here is my 1st Design i share with you.
a Case for ZVS induction heating. With a case for the transformer.
And for the screws 2mm heat inserts used
Heat inserts needed where the red arrow points.
And on the blue line,i screwed it from the transformer housing to the ZVS housing
So overall 10 heat inserts are needed and 4x M2x16, and 6x M2x10
Links:
ZVS Heater: https://www.amazon.de/dp/B07PRR533K
Transformer: https://www.amazon.de/dp/B0C8CLWN2J i took the 400W edition
Don't hestitate to contact me in english or german if you have any question. :)
| Deckel_Spule.f3d | 956.8KB | |
| Deckel_Spule.stl | 539.4KB | |
| Deckel_Trafo.stl | 418.9KB | |
| Gehäuse_Trafo.stl | 992.7KB | |
| Kabelentlastung.stl | 1.0MB | |
| Kabelschacht.stl | 71.1KB | |
| Spulengehäuse_v18.iges | 14.2MB | |
| Spulen_Gehäuse.f3d | 669.4KB | |
| Spulen_Gehäuse.stl | 263.2KB |
