Zuca Cart Knobs 3D Printer Model
The file 'Zuca Cart Knobs 3D Printer Model' is (stl) file type, size is 222.3KB.
The file 'Zuca Cart Knobs 3D Printer Model' is (stl) file type, size is 222.3KB.
This is a replacement knob for a Zuca disc golf cart, you can drop in an M12 nut, then glue or insertion fit the back cover and then install.
You will need a 12mm x1.75 (coarse thread) nut, you can also use a lock nut and locknut version of the cover (Cover_Locknut_xxxxx) version.
UPDATE: 2/5/2022
I made one functionality update and one visual update to the housing for version 1.1
The knob was missing a small boss on the top face that lets it ride on the bearing and not the wheel, this meant that you had to add a washer to shim it. This newer version shouldn't require a washer.
I also updated the holes where the cover clips into, they are now blind holes, which helps with the aesthetics a little.
| Cover_Locknut_v1.0.stl | 206.6KB | |
| Cover_v1.0.stl | 228.5KB | |
| Housing1.1.stl | 366.0KB |
