ZSU-23-4 Shilka 3D Printer Model
The file 'ZSU-23-4 Shilka 3D Printer Model' is (stl) file type, size is 1.7MB.
The file 'ZSU-23-4 Shilka 3D Printer Model' is (stl) file type, size is 1.7MB.
20-02-2019
Following a request to make this model easier to print at 1/300 scale, I have added some additional STL files
Shilka one piece is the complete model
Shilka Hull complete hull
Shilka Turret complete turret
To scale down to 1/300 I use a ratio of 34% adn to 1/285 I use 36%.
I have not tried printing these at 1/100 scale.
This is a 1/100 modelof a ZSU-23-, ideal for Team Yankee or similar war-games. It is based on an STL I found on line, but can't remember where I got it. If it's yours let me know and I'll credit you.
I have had to toughen up the original STL so that it will print including new guns a tougher radar dish.Additionally splitting the model into separate components.
The guns should be printed WITHOUT supports or brims, unless you have a very steady hand when cleaning up the model.
| shilka_guns_lower.stl | 36.2KB | |
| shilka_guns_upper.stl | 20.2KB | |
| shilka_one_piece.stl | 1.5MB | |
| shilka_turret_5.stl | 365.0KB | |
| shilka__hull-3.stl | 483.5KB | |
| shilka__hull.stl | 1017.0KB | |
| shilka__left_track.stl | 271.3KB | |
| shilka__radar.stl | 73.1KB | |
| shilka__right_track.stl | 271.3KB | |
| shilka__turret.stl | 498.5KB |
