A full scale model of the silver longsword from Legend of Zelda: Breath of the Wild. This uses a 21" segment of 1/2" schedule 40 PVC to stabilize the handle.
| blade_1.stl | 2.0MB | |
| blade_2.stl | 509.8KB | |
| blade_3.stl | 461.7KB | |
| blade_4.stl | 572.8KB | |
| blade_5.stl | 468.4KB | |
| blade_6.stl | 203.3KB | |
| crossguard.stl | 3.0MB | |
| full_silver_longsword.stl | 10.4MB | |
| hilt.stl | 5.2MB | |
| large_pin_print_15.stl | 684.0B | |
| lower_handle.stl | 1.6MB | |
| lower_knuckle_guard.stl | 1.0MB | |
| middle_knuckle_guard.stl | 787.7KB | |
| small_pin_print_6.stl | 684.0B | |
| upper_handle.stl | 1.4MB | |
| upper_knuckle_guard.stl | 730.4KB |
