Wanted to make a cable chain setup for my Zonestar P802M. Used a modified version of the standard cable chain link so the connectors would fit through the links. Used Sketchup to make the custom mounting points. No need to print with support, raft, or brim. I was able to use the extra hardware that came with the printer for every modification except the carriage mount screws. I have attached the .Skp file so you can play around with what I was using. Will upload more pics when it is finished.
Update:9/20 - Finished setting up X-Axis Motor chain and shared those pics as well.
NOTE: You need to print 4 locking cable chains and 1 locking cable chain "2". Used 20 chain links for the Z-Axis travel (X Stepper Motor). Used 29 chain links for the X-Axis travel (extruder carriage). I would recommend re-leveling after installing.
| Cable_Chain.stl | 352.0KB | |
| Cable_Chain_System.skp | 1.2MB | |
| Carriage_Mount.stl | 278.1KB | |
| Locking_Cable_Chain.stl | 358.2KB | |
| Locking_Cable_Chain_2.stl | 362.8KB | |
| Stepper_Motor_Mount.stl | 254.3KB | |
| X-Axis_Lower_Mount.stl | 281.0KB | |
| X-Axis_Motor_Mount.stl | 362.7KB |
