Zombicide Black Plague Rooms / Walls 3D Printer Model
The file 'Zombicide Black Plague Rooms / Walls 3D Printer Model' is (stl) file type, size is 30.6MB.
The file 'Zombicide Black Plague Rooms / Walls 3D Printer Model' is (stl) file type, size is 30.6MB.
Half-Height room walls for Zombicide Black Plague. Eventually I'll upgrade these to full wall heights...
The "Extension" room is for 2-section rooms, as the other two are 90mm squares.
Uses parts from
https://www.thingiverse.com/thing:2597102
and
https://www.thingiverse.com/thing:2821122
Print list thusfar: (Black Plague)
25 basics
13 extensions
10 straights
8 corners (possibly 9)
2 half-large
4 outer walls
Update 1-21 : Special tiles added for 2-block rooms, the temple, and the special arc-corner tile
By Tile (Black plague)
9r 2 basic
2 extension
9v 2 basic
1 straight outer wall
1 corner
2 extension
8V Special room
1 corner
2 straights
3 basics
8R 1 extensions
1 half large
1 straight
2 basics
7v 4 basic
7r 3 basic
1 corner
2 outer walls
1 special curve?
6 2 basic
2 extension
5 4 basic
1 straight
4 4 basics
2 extensions
2 straights
3 2 basic
2 extensions
2 straights
2 2 basic
2 extension
2 straight
1 corner
1 4 corners
2 outer walls
2 extensions
1 half large
1 basic
| basic.stl | 7.8MB | |
| Basic_Special_Room_-_No_internal.stl | 3.9MB | |
| corner.stl | 4.2MB | |
| door_insert.stl | 81.3KB | |
| Half-large.stl | 5.9MB | |
| Half-large_Extension.stl | 5.9MB | |
| long-empty.stl | 11.7MB | |
| outer_wall.stl | 2.0MB | |
| special_corner.stl | 6.8MB | |
| special_internal.stl | 4.0MB | |
| straight_v2.stl | 1.7MB | |
| Temple_Corner_with_Walls.stl | 15.0MB | |
| wall_insert.stl | 1.2MB |
