ZOHD Dart XL Battery Hatch Latch 3D Printer Model
The file 'ZOHD Dart XL Battery Hatch Latch 3D Printer Model' is (stl) file type, size is 2.9KB.
The file 'ZOHD Dart XL Battery Hatch Latch 3D Printer Model' is (stl) file type, size is 2.9KB.
This is a latch that is designed to replace the magnetic catches on the battery bay of the ZOHD Dart XL.
Why?
I've installed an Eagletree MicroVector in mine and the best place for the GPS and compass unit was way too close to those magnets to not encounter interference.
This part prints in pieces with the lager plate and tunnels creating the guide for the bolt that is glued to the actuator that takes the place of the carbon piece in the cover installed from the factory. Glueing and some work with an Exacto needed for installation.
If you use CURA and need to split it into the separate parts to print then watch this:
https://youtu.be/C6oA6nkGjko
You can see the maiden flight (before I installed this) here - https://www.youtube.com/watch?v=-WDOF6bUhv8
Happy flying!
| Dart_XL_Hatch_-_vertical_lever_v1.0.stl | 50.1KB |
