ZOHD Dart Walksnail Nose Kit (grill, Camera And AVATAR Mount) 3D Printer Model
The file 'ZOHD Dart Walksnail Nose Kit (grill, Camera And AVATAR Mount) 3D Printer Model' is (stl) file type, size is 26.0KB.
The file 'ZOHD Dart Walksnail Nose Kit (grill, Camera And AVATAR Mount) 3D Printer Model' is (stl) file type, size is 26.0KB.
These pieces are how I've added a Walksnail Nano V2 unit into the nose of my ZOHD Dart V1 (see https://youtu.be/PEKIUwAG-JM).
Use the grill to act as a guide and cut away all material behind where it will for for the pieces.
Print two of the camera brackets (flip one 180 degrees ion CURA) and attach to the camera and glue into place so the lens is a few mm behind the foam.
Shim the AVATAR holder with small pieces of wood (I use ice-lolly sticks here!) and screw it into the AVATAR unit then glue under the larger recess you've cut, above the camera.
Finally, install the grill and push it so that the camera lens isn't proud.
Happy flying!
| Camera_mount_for_Dart_v1.2.stl | 50.0KB | |
| Dart_Grill_v0.15.stl | 267.2KB | |
| Walksnail_mount_for_Dart_Nose_V3.0.stl | 126.8KB |
