Использовать автоматические поддержки . Для крепления Bltouch нужны вплавляемые гайки M2.
Мой код для Klipper:
[bltouch]
sensor_pin: ^PC4
control_pin: PA8
y_offset: 44.75
x_offset: 4
speed: 10.0
samples: 2
samples_result: median
sample_retract_dist: 3.0
samples_tolerance: 0.1
samples_tolerance_retries: 1
[screws_tilt_adjust]
screw4: 26 , 1
screw4_name: front left screw
screw1: 228 , 1
screw1_name: front right screw
screw2: 228 ,141
screw2_name: back right screw
screw3: 26 , 141
screw3_name: back left screw
speed: 100
screw_thread: CW-M4
[bed_mesh]
speed: 40
horizontal_move_z: 5
mesh_min: 12,50
mesh_max: 250,180
probe_count: 6,5
algorithm: bicubic
fade_start: 1
fade_end: 10
| Framev_5015bltoch.stl | 3.7MB |
